3 Chapter

S.M.A.R.T. Status Check [Enabled]

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When read/write of your hard disk errors occur, this feature allows the hard disk to report warning messages during the POST.

Configuration options: [Enabled] [Disabled]

Hot Plug [Disabled]

These items appear only when you set the SATA mode item to [AHCI Mode] or [RAID Mode], and allow you to enable/disable SATA Hot Plug Support.

Configuration options: [Disabled] [Enabled]

3.5.4System Agent Configuration

Memory Remap Feature [Enabled]

[Enabled]

Allow you to enable remapping the memory above 4GB.

[Disabled]

Disables this function.

Graphics Configuration

Primary Display [Auto]

Allows you to select a primary display from IGFX, PEG, or PCI graphic devices, or select SG for switchable GFX.

Configuration options: [Auto] [IGFX] [PEG]

iGPU Memory [32M]

This item select DVMT 5.0 pre-allocated graphic memory size, used by the internal graphic device.

Configuration options: [32M] [64M] [96M]~[1024M]

Render Standby [Enabled]

Allows you to enabled or disabled render standby support.

Configuration options: [Disabled] [Enabled]

iGPU Multi-Monitor [Enabled]

Allows you to enable the iGPU Multi-Monitor. For Lucid Virtu MVP function supports, set this item to [Enabled] to empower both integrated and discrete graphics. iGPU shared system memory size is fixed in 64MB

Configuration options: [Disabled] [Enabled]

3-20

Chapter 3: BIOS setup