3.USB 2.0 connectors (10-1 pin USB 3 ~ 10)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis.

These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.

2 Chapter

 

 

USB910

 

USB78

 

USB56

 

USB34

P8Z77-V LE

 

USB+5V USBP10- USBP10+

GND NC

 

USB+5V USBP8- USBP8+

GND NC

 

USB+5V USBP6- USBP6+

GND NC

 

USB+5V USBP4- USBP4+

GND NC

 

PIN 1

USB+5V USB P9- USB P9+

GND

PIN 1

USB+5V USB P7- USB P7+

GND

PIN 1

USB+5V USB P5- USB P5+

GND

PIN 1

USB+5V USB P3- USB P3+

GND

 

 

 

 

 

P8Z77-V LE USB2.0 connectors

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

The USB module cable is purchased separately.

4.Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.

AGND NC SENSE1 RETUR

SENSE2 RETUR

AGND NC NC

NC

AAFP

 

 

PIN 1

 

PIN 1

P8Z77-V LE

 

MIC2 MICPWR Line out_R NC Line out_L

PORT1 L PORT1 R PORT2 R

SENSE_SEND PORT2 L

HD-audio-compliant

Legacy AC’97

pin definition

compliant definition

P8Z77-V LE Front panel audio connector

•We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.

•If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Select item in the BIOS setup to [HD Audio]; if you want to connect an

AC'97 front panel audio module to this connector, set the item to [AC 97]. By default, this connector is set to [HD]. Refer to 3.5.6 Onboard Devices Configuration for details.

2-22

Chapter 2: Hardware information