Items Function description1CPU Load-line Calibration

It allows you to adjust the voltage range to control CPU Load Line. Set to a high value for system performance or to a low value for power efficiency.

2CPU Current Capability

A higher value provides wider total power range and extends the overclocking frequency range simultaneously.

3CPU Voltage Frequency

It allows you to enable Spread Spectrum to enhance system stability.

4iGPU Load-line Calibration

iGPU Load-line is based onIntel VRM specifications, and affects the iGPU voltage.

A higher value can get a higher iGPU voltage and a good performance, but decreases the CPU and VRM thermal conditions.

5iGPU Current Capability

A higher value brings higher iGPU power range, and extends the overclocking frequency range simultaneously to enhance the iGPU performance.

6CPU Power Phase Control

Increase phase number under heavy system loading to get more transient and better thermal performance. Reduce phase number under light system loading to increase VRM efficiency.

7CPU Power Response Control

The DIGI+ VRM controller provides a faster and precise power response rate for CPU. Apply a higher value for an extreme overclocking.

8CPU Power Duty Control

CPU Power Duty Control adjusts the current of every VRM phase and the thermal of every phase component.

The actual performance boost may vary depending on your CPU specification.

Do not remove the thermal module. The thermal conditions should be monitored.

Refer to the software manual in the support DVD or visit the ASUS website at

www.asus.com for detailed software configuration.

4 Chapter

4-10

Chapter 4: Software support