2.Intel® Z77 Serial ATA 3.0 Gb/s connectors (7-pin SATA3G_1/2 [blue])

These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical disc drives via Serial ATA 3.0 Gb/s signal cables.

If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z77 chipset.

 

SATA3G_1

 

GND RSATA RXP1

RSATA RXN1

GND RSATA TXN1

RSATA TXP1

GND

P8Z77-I DELUXE

GND RXP2RSATA

RXN2RSATA

GND TXN2RSATA

TXP2RSATA

GND

 

SATA3G_2

P8Z77-I DELUXE SATA 3.0Gb/s connectors

•These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 3.5.3 SATA Configuration for details.

•Before creating a RAID set, refer to section 4.4 RAID configurations or the manual bundled in the motherboard support DVD.

•When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section

3.5.3 SATA Configuration for details.

•You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using

Windows® XP SP3 or later versions.

Chapter 2

ASUS P8Z77-I DELUXE

2-21