3.HARDWARE SETUP
3.2Layout Contents
Motherboard Settings |
|
| |
1) | JEN | p. 17 | Jumper Mode (Default) |
2) | SW1_A | p. 18 | 200 MHz FSB Setting |
3) | SW1_B | p. 18 | 266 MHz FSB Setting |
4) | SW1_C | p. 19 | CPU External Frequency Setting |
Expansion Slots/Sockets |
|
| |
1) | System Memory | p.21 | System Memory Support |
2) | DIMM1/2 | p.22 | DIMM Memory Module Support |
3) | Socket 462 (Socket A) | p.23 | CPU Support |
4) | PCI1/2/3 | p.26 | |
5) | AGP | p.27 | Accelerated Graphics Port (AGP) |
Connectors |
|
| |
1) | PS2KBMS | p.27 | PS/2 Mouse Port Connector (6 pin female) |
2) | PS2KBMS | p.27 | PS/2 Keyboard Port Connector (6 pin female) |
3) | USB | p.28 | Universal Serial Bus Connectors 0 & 1 (Two 4 pin female) |
4) | COM1/COM2 | p.28 | Serial Port Connector |
5) | PRINTER | p.28 | Parallel Port Connector (25 pin female) |
6) | GAME_AUDIO | p.29 | Game/MIDI Connector (15 pin female) (optional) |
7) | GAME_AUDIO | p.29 | Audio Port Connectors (Three 1/8” female) (optional) |
8) | RJ45 | p.29 | |
9) | PRIMARY IDE | p.30 | IDE Connectors (Two |
| SECONDARY IDE |
|
|
10) | FLOPPY | p.30 | Floppy Disk Drive Port Connector (34 pin) |
11) | CHASS | p.31 | Chassis Intrusion Lead |
12) | IR | p.31 | Infrared Module Connector (5 pin) |
13) | WOL_CON | p.32 | |
14) | WOR | p.32 | |
15) | CPU_, PS_, CHASS_FAN | p.33 | Chassis, Power Supply, CPU Fan Connectors (3 pin) |
16) | CD_IN, AUX, MODEM | p.34 | Internal Audio Connectors (Four 4 pin) |
17) | HPHONE | p.34 | Headphone |
18) | USB2 | p.35 | USB Header |
19) | SMB | p.35 | SMBus Connector |
20) | ATXPWR | p.36 | ATX Power Supply Connector (20 pin) |
21) | IDELED | p.36 | IDE Activity LED (2 pin) |
22) | SPEAKER (PANEL) | p.37 | System Warning Speaker Connector (4 pin) |
23) | PWR.LED (PANEL) | p.37 | System Power LED Lead (3 pin) |
24) | RESET (PANEL) | p.37 | Reset Switch Lead (2 pin) |
25) | PWR.SW (PANEL) | p.37 | ATX / |
26) | SMI (PANEL) | p.37 | System Management Interrupt Lead (2 pin) |
Layout Contents
3. H/W SETUPASUS | 15 |