.3

H/WConnectors

SETUP

3.HARDWARE SETUP

13)Wake-On-LAN Connector (3 pin WOL_CON)

This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT: This feature requires that Wake-On-LANfeatures are enabled (see 4.4.3 Power Management) and that your system has an ATX power supply with at least 720mA +5V standby power.

IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power

WOL_CON

Ground

A7V133-M

PME +5 Volt Standby

A7V133-M Wake-On-LAN Connector

14)Wake-On-Ring Connector (2 pin WOR)

This connector connects to internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port.

IMPORTANT: This feature requires that Wake-On-Ringfeatures are enabled (see 4.4.3 Power Management) and that your system has an ATX power supply with at least 720mA +5V standby power.

WOR_CON

Ring# Ground

A7V133-M

2 1

A7V133-M Wake-On-Ring-Connector

32

ASUS A7V133-M User’s Manual