Asus PC133, VC133 JEN, Setting, 4.4 Advanced Menu, 1) Jumper Setting (JEN), ASUS A7V-EUser’s Manual, Motherboard Features Settings (DIP Switches - SW1)

3. HARDWARE SETUP

Motherboard Features Settings (DIP Switches - SW1)

The motherboard’s onboard functions are adjusted through the DIP switches. The white block represents the switch’s position. The example below shows all the switches in the OFF position.

		CLOCK TABLE
			5	5. Frequency Selection
			4	4. Frequency Selection
			3	3. Frequency Selection
		ON	2	2. Frequency Selection
			1	1. Frequency Selection
		ON	OFF
		DSFID
	ON	ON			1. Frequency Multiple
A7V-E					2. Frequency Multiple
					3. Frequency Multiple
A7V-E DIP Switches	OFF	1 2	3 4 5		4. Frequency Multiple
					5. Frequency Multiple

1) Jumper Setting (JEN)

This jumper allows you to enable or disable the JumperFree™ mode. In this version he JumperFree™ mode allows CPU external frequency settings to be made through the BIOS setup (see 4.4 Advanced Menu). If Jumper Mode is selected, and the switches are used, then DSFID switch 5 must be set to on for all Clock Multiplier combinations.

Setting	JEN
JumperFree™	[2-3] (default)
Jumper Mode	[1-2]
	Jumper Mode			JumperFree Mode
					(Default)
		JEN			JEN
		1	2				2	3
	ON	DSFID		ON	DSFID
		ON			ON
	OFF	1 2	3 4 5	OFF	1 2 3 4 5
					CLOCK TABLE
A7V-E				ON	ON
A7V-E JumperFree™ Mode Setting				OFF	1	2	3	4	5
					CPU	100MHz

Motherboard Settings

3. H/W SETUP

ASUS A7V-E User’s Manual 17