3.Connect the cables as shown. Refer to the succeeding sections for detailed instructions.

Power adapter

DVI cable

VGA cable

Component cable

RCA cable

PC Audio cable

USB 2.0 cable

4.Close the rear connector cover. Align the cover to the three slots near the ports and close the cover

carefully. A click indicates that the cover has been closed successfully.

rear connector cover

• A VGA cable, audio cable, and USB cable comprise the supplied VGA- audio-USB 3-in-1 cable.

• The component cable is purchased separately.

2.2.1Connecting a computer equipped with a VGA/DVI port

1.Plug the VGA, audio, and USB connectors of the supplied

3-in-1 cable to the LCD monitor’s VGA, Line-in, and USB ports respectively.

2.Connect the other ends of the supplied 3-in-1 cable to your computer’s VGA, Line-out, and USB ports respectively.

3.Tighten the two screws to secure the VGA connector.

4.Connect one end of the supplied DVI cable to the LCD monitor, then connect the other end to your computer’s DVI port.

When both the VGA and the DVI cables are connected, you can choose either VGA mode or DVI mode from the Input Select item of the OSD functions, or by using the hotkey on the front panel. See pages 1-3 and 3-4 for details.

ASUS LCD Monitor PW201

2 - 3