The following two items appear only when you set the CPU Core Ratio to [Sync All

Cores] or [Per Core].

1-Core Ratio Limit [Auto]

Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 1-Core Limit value, which should be higher than or equal to the 2-Core Ratio Limit.

2-/3-/4-Core Ratio Limit [Auto]

These items become configurable only when you set the CPU Core Ratio item to [Per Core].

2.5.4Min CPU Cache Ratio [Auto]

Allows you to set the minimum CPU Cache Ratio.

2.5.5Max CPU Cache Ratio [Auto]

Allows you to set the maximum CPU Cache Ratio.

2.5.6CPU bus speed : DRAM speed ratio mode [Auto]

Allows you to set the CPU bus speed to DRAM speed ratio mode.

[Auto]

DRAM speed is set to the optimized settings.

[100:133]

The CPU bus speed to DRAM speed ratio is set to 100:133.

[100:100]

The CPU bus speed to DRAM speed ratio is set to 100:100.

2.5.7Memory Frequency [Auto]

Allows you to set the memory operating frequency. Configuration options: [DDR3- 800MHz][DDR3-1066MHz][DDR3-1333MHz][DDR3-1600MHz][DDR3-1866MHz][DDR3- 2133MHz]~[DDR3-3200MHz]

Selecting a very high memory frequency may cause the system to become unstable! If this happens, revert to the default setting.

2.5.8CPU Graphics Max. Ratio [Auto]

Allows you to set the CPU Graphics maximum ratio. The maximum ratio is 60x. Use <+>/<-> to adjust the value.

2.5.9GPU Boost [As is]

Allows you to enable the GPU Boost to accelerate the integrated GPU for extreme graphics performance. Configuration options: [As is] [Enabled].

2.5.10EPU Power Saving Mode [Disabled]

Allows you to enable or disable the EPU power saving function. Configuration options: [Disabled] [Enabled]

2-14

Chapter 2: Getting started