6.1.3RAID controller selection

You can choose either the LSI Software RAID Configuration Utility or the Intel Rapid Storage Technology as the default utility to create RAID set(s). See 5. RAID configuration utility selection on page 4-6 for details.

6.1.4Setting the RAID item in BIOS

You must enable the RAID function in the BIOS Setup before creating RAID set(s) using SATA HDDs. To do this:

1.Enter the BIOS Setup during POST.

2.Go to the Advanced Menu > PCH SATA Configuration, then press <Enter>.

3.Set SATA Mode to [RAID Mode]

4.Press <F10> to save your changes and exit the BIOS Setup.

Refer to Chapter 5 for details on entering and navigating through the BIOS Setup.

ASUS RS720-X7/RS8

6-3