Using the Objects command

To initialize the virtual drives using the Objects command

1.From the Management Menu, select Objects > Virtual Drive, and then press <Enter>.

LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010

BIOS Version A.10.09231523R

 

 

 

 

 

Objects

 

 

Management

 

MenuAdapter

 

 

 

Configure

 

Virtual

 

Drive

Initialize

 

Physical

 

Drive

Objects

 

 

 

 

 

Rebuild

 

 

 

 

 

Check Consistency

 

 

 

 

 

 

 

 

 

 

Change VD Parameters

Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option

2.Select the virtual drive to initialize from the Virtual Drives sub‑menu, and then press <Enter>.

LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010

BIOS Version A.10.09231523R

 

 

 

 

 

 

 

 

 

 

 

 

Vitual Drive(1)

 

 

 

 

 

Virtual Drive 0

 

 

 

 

Objects

 

 

Management

MenuAdapter

 

 

 

 

 

 

Configure

Virtual

 

Drive

 

 

Initialize

Physical

 

Drive

 

 

Objects

 

 

 

 

 

 

 

Rebuild

 

 

 

 

 

 

 

Check Consistency

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select VD

Press ENTER To Select A VD, <Del> To Delete A VD

6-14

Chapter 6: RAID configuration