Asus RT-N10U user manual Cannot access the Internet

	Problem		Action
Cannot access the Internet		• Move the router closer to the wireless client.
via wireless LAN adapter.		• Check whether the wireless adapter is
		connected to the correct wireless router.
		• Check whether the wireless channel in use
		conforms to the channels available in your
		country/area.
		• Check the encryption settings.
		• Check if the ADSL or Cable connection is
		correct.
		• Retry using another Ethernet cable.
Internet is not accessible.		• Check the status indicators on the ADSL
		modem and the wireless router.
		• Check if the WAN LED on the wireless
		router is ON. If the LED is not ON, change
		the cable and try again.
When ADSL Modem “Link”		• Restart your computer.
light is ON (not blinking), this		• Refer to the Quick Start Guide of the
means Internet Access is		wireless router and re-configure the settings.
possible.		• Check if the WAN LED on the wireless
		router is ON.
		• Check the wireless encryption settings.
		• Check if the computer can get the IP
		address (via both wired network and
		wireless network).
		• Ensure that your web browser is configured
		to use the local LAN, and is not configured
		to use a proxy server.
If the ADSL “LINK” light blinks		• Ensure that all your cables are all properly
continuously or stays off,		connected .
Internet access is not possible		• Disconnect the power cord from the ADSL
- the Router is unable to		or cable modem, wait a few minutes, then
establish a connection with		reconnect the cord.
the ADSL network.		• If the ADSL light continues to blink or stays
		OFF, contact your ADSL service provider.
Network name or encryption		• Try setting up the wired connection and
keys are forgotten.		configuring the wireless encryption again.
		• Press the Reset button at the rear panel
		of the wireless router for more than five
		seconds.

58 RT-N10U Chapter 6: Troubleshooting

7656_rtn10u.indd 58

8//1 10:06:06 AM