Asus T3-M2NC51PV 5.6.3 Security, Hit ‘DEL’ Message Display [Enabled], Interrupt 19 Capture [Disabled], Change Supervisor Password, Not, To set a Supervisor Password:

Hi t ‘DEL’ Message Di spl ay [Enabl ed]

When set to Enabled, the system displays the message “Press DEL to run Setup” during POST. Configuration options: [Disabled] [Enabled]

I nterrupt 19 Capture [ Di sabl ed]

When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled]

5.6.3 Securi ty

The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the configuration options.

Security Settings			<Enter> to change
Supervisor Password : Not Installed			password.
			<Enter> again to
User Password	: Not Installed		disabled password.
Change Supervisor	Password
Boot Sector Virus	Protection	[Disabled]

Change Supervi sor Password

Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.

To set a Supervisor Password:

1.Select the Change Supervisor Password item and press <Enter>.

2.From the password box, type a password composed of at least six letters and/or numbers, then press <Enter>.

3.Confirm the password when prompted.

The message “Password Installed” appears after you successfully set your password.

To change the supervisor password, follow the same steps as in setting a user password.

To clear the supervisor password, select the Change Supervisor Password then press <Enter>. The message “Password Uninstalled” appears.

ASUS T3-M2NC51PV 5-29