2. USB devi ce wake-up (3-pi n USBPW123456)

Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode).

The USBPW1234 jumper is for the rear USB ports. The USBPW5678 jumper is for the internal USB connectors that you can connect to additional USB ports.

 

 

2

 

 

1

 

 

(

USBPW56

 

M2N5-BN

 

 

 

3

 

2

2

2

1

 

1

+5V

+5VSB

 

•The USB device wake-up feature requires a power supply that can provide 500 mA on the +5VSB lead for each USB port; otherwise, the system would not power up.

•The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode.

2. Keyboard power (3-pi n KBPWR)

This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least

500 mA on the +5VSB lead, and a corresponding setting in the BIOS.

 

KBPWR

 

3

2

2

1

 

+5V +5VSB (Default)

M2N5-BN

M2N5-BN Keyboard Power Setting

4-

Chapter 3: Starting up