PI O Mode [ Auto]

Selects the PIO mode.

Configuration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [ Auto]

Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]

SMART Moni tori ng [ Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled]

32Bi t Data Transfer [Enabl ed]

Enables or disables 32-bit data transfer.

Configuration options: [Disabled] [Enabled]

5.3.4 I DE Confi gurati on

The items in this menu allow you to set or change the configurations for the IDE devices installed in the system. Select an item then press <Enter> if you want to configure the item.

IDE Configuration

 

 

SATA Configuration

[Enhanced]

 

Hard Disk Write Protect

[Disabled]

When in AHCI/RAID

IDE Detect Time Out (Sec)

[35]

mode, SATA controller

 

 

is forced to Native

 

 

mode.

SATA Confi gurati on [Enhanced]

Configuration options: [Compatible] [Enhanced] [Disabled]

Configure SATA as [IDE] Configuration options: [IDE] [AHCI]

H ard Di sk Wri te Protect [ Di sabl ed]

Allows you to enable to disable the hard disk write protection. This will be effective only if device is accessed through BIOS. Configuration options: [Disabled] [Enabled]

I DE Detect Ti me Out [ 35]

Selects the time out value for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]

5-16

Chapter 5: BIOS setup