5.5.5 APM Confi gurati on

APM Configuration

 

Restore on AC Power Loss

[Power Off]

Power On By RTC Alarm

[Disabled]

Power On By External Modems

[Disabled]

Power On By PCI Devices

[Disabled]

Power On By PCIE Devices

[Disabled]

Power On By PS/2 Keyboard

[Disabled]

Power On By PS/2 Mouse

[Disabled]

Restore on AC Power Loss [ Power Off]

When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, the system goes on after an AC power loss. When set to Last State, the system goes into either off or on state, whatever the system state was before the AC power loss.

Configuration options: [Power Off] [Power On] [Last State]

Power On By RTC Al arm [ Di sabl ed]

Allows you to enable or disable RTC to generate a wake event. When this item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute, and RTC Alarm Second appear with set values. Configuration options: [Disabled] [Enabled]

Power On By External Modems [ Di sabl ed]

This allows either settings of [Enabled] or [Disabled] for powering up the computer when the external modem receives a call while the computer is in Soft-off mode. Configuration options: [Disabled] [Enabled]

Power On By PCIE Devi ces [ Di sabl ed]

When set to [Enabled], this parameter allows you to turn on the system through a PCI LAN, modem card, or PCI Express device. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]

Power On By PCIE Devi ces [ Di sabl ed]

When set to [Enabled], this parameter allows you to turn on the system through a PCI LAN, modem card, or PCI Express device. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]

5-26

Chapter 5: BIOS setup