Asus TX97-X Jumper Settings, SIO, [2-3], BBLKW, Enable, Disable, Enabled, Multi-I/O, (Default), Programming, Disabled/Protect, Chipset Features Setup

III. INSTALLATION

Jumper Settings

1.Onboard Multi-I/O Selection (SIO)

You can selectively disable each onboard Multi-I/O item (floppy, serial, paral- lel, and IrDA) through Chipset Features Setup of BIOS SOFTWARE or dis- able all Multi-I/O items at once with the following jumper in order to use your own Multi-I/O card.

Multi-I/O	SIO
Enable	[1-2] (Default)
Disable	[2-3]

SIO		SIO
	1	1
	2		2
	3		3
Enable (Default)		Disabled

Multi I/O Setting (Enable / Disable)

2.Flash ROM Boot Block Programming (BBLKW)

This sets the operation mode of the boot block area of the Programmable Flash ROM to allow programming in the Enabled position. This is required only if prompted by the Flash Memory Writer Utility as shown in BIOS SOFTWARE.

Programming	BBLKW
Disabled/Protect	[1-2]	(Default)
Enabled	[2-3]
		BBLKW	BBLKW
		1	1
		2	2
		3	3
		Disabled / Protected	Enabled
		(Default)

Boot Block Programming (Disable / Enable)

INSTALLATION	(Jumpers)
III.

ASUS TX97-X User’s Manual 15