Installing memory modules

Your VivoPC Barebone comes with two SO-DIMM memory slots that allow you to install two 2 GB, 4 GB, or 8 GB unbuffered with non-ECC 1.35V DDR3 204-pin SO-DIMMs for a maximum of 16 GB memory.

IMPORTANT! You can only install 1.35V DDR3 SO-DIMM to the VivoPC’s DIMM slots.

NOTE: Refer to http://www.asus.com for the list of compatible DIMMs.

To install or upgrade the memory modules:

1.Turn off your VivoPC.

2.Disconnect all cables and peripherals.

3.Place the VivoPC on a flat and stable surface.

4.Press down the latch at the rear panel to release the top cover.

22VivoPC Barebone