2.3 Detaching the arm/base (for VESA wall mount)
The detachable arm/base of this monitor is specially designed for VESA wall mount.
To detach the arm/base:
1.Have the front of the monitor face down on a table.
2.Remove the rubbers in the four screw holes. (Figure 1)
3.Remove the base (Figure 2).
4.Pry the rear hinge cover (Figure 3).
5.Use a screwdriver to remove the four screws on the hinge (Figure 4), then remove the hinge.
| 1 |
| 2 |
Figure 1 | Figure 2 |
Figure 3 | Figure 4 |
We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
Chapter 2: Setup |
