Asus WL-106GM One Touch Wizard

Chapter 2 - Installation

One Touch Wizard

Use One Touch Wizard to setup your wireless connection with an existing wireless LAN.

1.Launch One Touch Wizard from Start menu and click Next to set up your wireless network.

Installation

Chapter 2

2.Select an AP from the Available Networks field, then click Next.

3.Connection is complete. Click Next to setup the IP address for the WLAN card.

4.Choose to obtain an IP address or to assign static address manually for your WLAN card. When IP setting is complete, click Finish to exit the One Touch Wizard.

Note: If the access point you want to connect has set up encryption policies, you must configure the same encryption on your WLAN Card. Select "Configure your wireless LAN settings" radio button in step 2 and make the settings accordingly. When the encryption settings are complete, you can launch the One Touch Wizard once again from the Start menu to set up the connection with your AP.

ASUS WLAN Card 9