English

Quick Start Guide

4.Establish connection with the ASUS Pocket Wireless AP.

5.Configure the IP settings of the desktop PC or notebook to establish connection to the Internet.

6.Check your connection.

Replacing the Ethernet cables of other devices

Follow these instructions to replace your Xbox, PlayStation® 2, SETUP-box, or network printer Ethernet cable connection with the ASUS Pocket Wireless AP.

1.Switch the device to Ethernet adapter mode using the mode switch. (Default SSID: ANY)

2.Place the ASUS Pocket Wireless AP nearest the AP you wish to connect, then turn on the device.

3.Connect one end of the RJ-45 cable to the Ethernet port of the device and the other end to the Ethernet port of the Xbox, PlayStation® 2, SETUP-box, or network printer.

IMPORTANT! If you failed to connect to an AP, press the reset button of the device to load the Button Scan mode default settings.

4.Configure the IP settings of the Xbox, PlayStation® 2, SETUP-box, or network printer to establish connection.

5.Check your connection.

Connecting to another AP as an adapter or wireless bridge

Follow these instructions to set your ASUS Pocket Wireless LAN AP as a WLAN adapter to access another AP with disabled WEP encryption and valid SSID.

1.Switch the device to Ethernet adapter mode using the mode switch. (Default SSID: ANY in an Infrastructure network)

2.Place the ASUS Pocket Wireless AP nearest the AP you wish to connect, then turn on the device.

3.Connect one end of the RJ-45 cable to the Ethernet port of the device and the other end to the Ethernet port of your desktop PC or notebook.

IMPORTANT! If you failed to connect to an AP, press the reset button of the device to load the Button Scan mode default settings.

4.Configure the IP settings of the desktop PC or notebook to establish connection to the local network.

5.Check your connection.

16

ASUS Pocket Wireless Access Point (WL-330)