Quick Start Guide

Installing the device

Follow these instructions to install the ASUS Pocket Wireless AP.

Access point mode (DC power)

1.

Connect one end of the RJ-45 cable

6

 

 

 

to the Ethernet port of the device.

 

 

 

2.

Connect the other end of the

 

 

 

 

RJ-45 cable to the 10Base-T port

4

 

 

 

of a network hub, switch, router, or

 

 

 

5

 

 

 

wall patch panel.

2

1

3

 

 

3.Insert the universal power adapter plug to the DC-IN socket of the device.

4.Connect the universal power adapter to a wall socket.

5.Insert the power plug to the DC-IN socket of the network hub, switch, or router.

6.Plug the power adapter of the network hub, switch, or router to a wall socket.

Ethernet adapter mode (USB bus power)

English

1.Connect one end of the RJ-45 cable to the Ethernet port of the device.

2.Connect the other end of the RJ-45 cable to the Ethernet port of your computer.

3.Insert the USB cable plug to the DC-IN socket of the device.

4.Insert the other end of the USB cable to any available USB port of your computer.

4 2 3

1

After installation, check the Power and Ethernet LEDs. These LEDs light up to indicate that the device is on and has physical connection to an Ethernet network.

NOTE. For notebooks with limited power supply, we recommend that you use the supplied universal power adapter and plug instead of the USB adapter and plug.

ASUS Pocket Wireless Access Point (WL-330)

3