Quick Start Guide

5. Enter the network name (SSID) of the wireless network you wish to connect.

6.Select the channel of the wireless network you wish to connect.

NOTE. You may select the channel if you set the device in an Ad-hoc network environment. In Infrastructure network, the channel is automatically selected.

7.Set the Network Type. Select Infrastructure if you wish to connect to an AP. Select Ad Hoc if you wish to connect to another wireless device.

8.Enable or disable MAC Cloning.

9.Click the WEP link or the Encryption tab.

• The SSID and WEP encryption keys of the ASUS Pocket Wireless AP must be the same with that of the AP or wireless device to establish connection.

If you are trying to connect to an AP (Infrastructure), make sure the MAC address of the ASUS Pocket Wireless AP is included in the AP authorization table.

10.Configure the Ethernet adapter WEP encryption settings.

Click OK when done.

IMPORTANT! Change the device WEP encryption settings only when your selected network has an enabled WEP encryption.

English

ASUS Pocket Wireless Access Point (WL-330)

9