Asus WL-500GP 2) Status indicators, 3) Wall mount option, PWR (Power), AIR (Wireless Network), WAN (Wide Area Network), LAN 1-4(Local Area Network)

WL-500gP Wireless Router User Manual

2) Status indicators

PWR AIR LAN WAN

PWR (Power)

Off	No power
On	System ready
Flashing-slow	Firmware upgrade failed
Flashing-quick	EZsetup processing
AIR (Wireless Network)
Off	No power
On	Wireless system ready
Flashing	Transmitting or receiving data (wireless)
WAN (Wide Area Network)
Off	No power or no physical connection
On	Has physical connection to an Ethernet network
Flashing	Transmitting or receiving data (through Ethernet cable)
LAN 1-4 (Local Area Network)
Off	No power or no physical connection
On	Has physical connection to an Ethernet network
Flashing	Transmitting or receiving data (through Ethernet cable)

3) Wall mount option

Out of the box, ASUS WL-500gP Wireless Router is designed to sit on a raised flat surface like a file cabinet or book shelf. The unit may also be converted for mounting to a wall or ceiling.

Follow these steps to mount the ASUS Wireless Router to a wall:

1. Look on the underside for the two mounting hooks.

2. Mark two upper holes in a flat surface.

3.Tighten two screws until only 1/4'' is showing.

4.Latch the hooks of the ASUS Wireless Router onto the screws.

Note: Re-adjust the screws if you cannot latch the ASUS Wireless Router onto the screws or if it is too loose.

4