Chapter 3 - Software Configuration

Note: By default, the Wireless Router will act as a router and provide an IP address only when a physical connection on the WAN port exists. You must connect the Wireless Router’s WAN port with your ADSL or Cable modem using a network cable.

Note: Before rebooting your PC, the ASUS Wireless Router should be switched ON and in the ready state.

Using the Wireless Router for the First Time

1. ASUS Wireless Router Utilities

Run Device Discovery from “ASUS Utility” in Windows Start Programs.

2. Connect to the ASUS WLAN Web Manager

Run the ASUS WLAN Device Discovery from the Start menu and click Config when the device is found.

3. Utilities

Add 192.168.1.1 in the Exceptions box if you are using a proxy server.

If your computer’s IP is not on the same subnet as the ASUS Wireless Router (192.168.1.X), you will be asked to change it. The IPaddress can be any number from 2 to 254 that is not used by another device. Gateway is not required.

Note: Using a proxy server for your LAN requires that you set an exception for the ASUS Wireless Router or else connection will fail.

ASUS Pocket Wireless Router

23