Chapter 2 - Getting Started

4.Select “Use the following...”

IP address: 192.168.1.xxx (xxx can be any number between 1 and 254 that is not used by another device except 192.168.1.220 which is used by the “WL-HDD”)

Subnet Mask: 255.255.255.0

2 - Getting Started

SSID Settings

The SSID or the network name of the WLAN adapter must be configured correctly for proper operation. Click the LAN icon under “Network and Dialup Connections” and right-click to view its Properties. Click Configure under the General tab. Then select the Wireless Network tab. Make sure that the Network Name is set to “WL-HDD”and click OK.

Note: Disable WEP and set the SSID to default for any existing wireless LAN device connected to your computer.

Note: The procedure described here may be slightly different for various wireless adapter utilities. Refer to the documentation for your wireless client (notebook or PDA) as well as that for the wireless adapter for specific instructions.

When the wireless client is configured correctly, connection to the “WL-HDD”should be automatic.

ASUS Wireless "WL-HDD" User’s Manual

19