3.11.3ASUS CrashFree BIOS 3
The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file.
The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at http://support.asus.com and save it to a USB flash drive.
Recovering the BIOS
To recover the BIOS:
1.Turn on the system.
2.Insert the motherboard support DVD to the optical drive, or the USB flash drive containing the BIOS file to the USB port.
3.The utility automatically checks the devices for the BIOS file. When found, the utility reads the BIOS file and enters ASUS EZ Flash 2 automatically.
4.The system requires you to enter BIOS Setup to recover the BIOS setting. To ensure system compatibility and stability, we recommend that you press <F5> to load default BIOS values.
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure!
3.11.4ASUS BIOS Updater
ASUS BIOS Updater allows you to update the BIOS in DOS environment.
The screen captures used in this section are for reference only and may not be exactly the same as actually shown on your computer screen.
Before updating BIOS
•Prepare the motherboard support DVD and a USB flash drive.
•Download the latest BIOS file and BIOS Updater from http://support.asus.com and save them in your USB flash drive.
NTFS is not supported under DOS environment. Ensure that your USB flash drive is in single partition and in FAT32/16 format.
•Turn off the computer.
•Ensure that your computer has a DVD optical drive.
Chapter 3
ASUS |