4.3.7USB Charger+

USB Charger+ allows you to quick-charge your portable USB devices even if your computer is off, in sleep mode or hibernate mode.

Before using USB Charger+, ensure to disable the ErP Ready item from the Advanced > APM > ErP Ready in the Advanced mode of the BIOS Setup program.

Launching USB Charger+

To launch USB Charger+, click on the top edge of the screen, then click USB Charger+ on the AI Suite 3 main menu bar.

USB Charger+ screen

Click to detect the connected USB device

Indicates that the connected USB device is in charging mode

Click to fast- charge your USB device

Click to stop charging your USB device

Click to select the type of USB device that you wish to charge when the system is off

Click to apply the settings

Click to discard the settings

Ensure to connect your USB device into the USB port that supports this utility. Refer to section 2.3.1 Rear I/O connection of your user manual for more details.

• The USB Charger+ does not support USB hubs and USB extension cables, and generic USB cables.

•The USB Charger+ may not recognize some ASUS devices due to a special design.

4 Chapter

4-12

Chapter 4: Software support