• The plugged USB 3.0 device may run on xHCI or EHCI mode, depending on the operating system’s setting.
•USB 3.0 devices can only be used as data storage only.
•We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices.
•Due to the design of the Intel® 8 series chipset, all USB devices connected to the USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility.
•
•Intel display architecture design supports the following maximum supported pixel clocks (Pixel Clock = H total x V Total x Frame Rate (Screen refresh rate)):
-DisplayPort: 533 MHz
-
-RGB: 180 MHz
-HDMI port: 300 MHz
*Bluetooth and
| Bluetooth LED |
|
|
|
|
|
|
| ||
Status | Description | Status | Description |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Off | No link | Off | No link |
|
| Bluetooth | ||||
Green | Linked | Blue | Linked | LED |
|
| LED | |||
| ||||||||||
|
|
|
|
|
|
| ||||
|
| Blinking | Data activity |
|
|
|
|
|
|
|
|
| |||||||||
|
|
|
| |||||||
|
|
|
| v4.0/3.0 + HS |
|
|
| |||
*The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such mark by ASUSTeK Computer Inc. is under license. Other trademarks and trade names are those of their respective owners.
**LAN ports LED indications
Activity Link LED |
| Speed LED |
|
|
|
|
|
|
|
|
|
|
|
| ||
Status | Description | Status | Description | ACT/LINK |
| SPEED | ||||||||||
Off |
| No link | Off | 10 Mbps connection |
| |||||||||||
| LED |
|
| LED | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Orange |
| Linked | Orange | 100 Mbps connection |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Orange (Blinking) |
| Data activity | Green | 1 Gbps connection |
|
|
|
|
|
|
|
|
|
|
|
|
Orange (Blinking |
| Ready to wake up |
|
|
|
|
| LAN port | ||||||||
then steady) |
| from S5 mode |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Chapter 2
ASUS |