2.Intel® Z87 Serial ATA 6.0 Gb/s connectors
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z87 chipset.
| SATA6G_5 | SATA6G_3 | SATA6G_1 |
| RSATA_TXP5 | RSATA_TXP3 | RSATA_TXP1 |
| RSATA_TXN5 | RSATA_TXN3 | RSATA_TXN1 |
GND | GND | GND | |
RSATA_RXN5 | RSATA_RXN3 | RSATA_RXN1 | |
Z87I | RSATA_RXP5 | RSATA_RXP3 | RSATA_RXP1 |
| GND | GND | GND |
SATA6G_6 | SATA6G_4 | SATA6G_2 |
GND | GND | GND |
RSATA_TXP6 | RSATA_TXP4 | RSATA_TXP2 |
RSATA_TXN6 | RSATA_TXN4 | RSATA_TXN2 |
GND | GND | GND |
RSATA_RXN6 | RSATA_RXN4 | RSATA_RXN2 |
RSATA_RXP6 | RSATA_RXP4 | RSATA_RXP2 |
GND | GND | GND |
• These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 3.6.3 SATA Configuration for details.
• Before creating a RAID set, refer to section 5.1 RAID configurations or the manual bundled in the motherboard support DVD.
3. Front panel audio connector
This connector is for a
|
| AAFP |
| ||
| SENSE2_RETUR | PORT2 L | NC | Line out_L | |
| SENSE1_RETUR | SENSE_SEND |
| NC | |
| PORT2 R | NC | Line out_R | ||
NC | PORT1 R | NC | MICPWR | ||
Z | |||||
| AGND | PORT1 L | AGND | MIC2 | |
|
| PIN 1 |
| PIN 1 | |
| Legacy AC’97 | ||||
| pin definition | compliant definition |
•We recommend that you connect a
•If you want to connect a
connector, set the Front Panel Type item in the BIOS setup to [HD] or [AC97].
Chapter 1
ASUS |