9.System panel connector (10-1 pin PANEL)

This connector supports several chassis-mounted functions.

Z 78 PRO-I

PWR LED PWR BTN

F_PANEL

GND

Reset

PWR

Ground

PLED-

HDD_LED-

PLED+

HDD_LED+

 

PIN 1

+HDD_LED RESET

Z87I-PRO System panel connector

Q-Cable

•System power LED (2-pin PWR LED)

This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

•Hard disk drive activity LED (2-pin HDD LED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The HDD LED lights up or flashes when data is read from or written to the HDD.

•Power/Soft-off button (2-pin PWR BTN)

This 2-pin connector is for the system power button.

•Reset button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.

1 Chapter

1-28

Chapter 1: Product introduction