Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
PortHeadset4.1-channel5.1-channel7.1-channel

2.1-channel

 

 

 

 

Light Blue (Rear

Line In

Rear Speaker Out

Rear Speaker Out

Rear Speaker Out

panel)

 

 

 

 

Lime (Rear panel)

Line Out

Front Speaker Out

Front Speaker Out

Front Speaker Out

Pink (Rear panel)

Mic In

Mic In

Bass/Center

Bass/Center

Pink (Front panel)

Side Speaker Out

To configure a 7.1-channel audio output:

Use a chassis with HD audio module in the front panel to support a 7.1-channel audio output.

8.USB 2.0 ports 7 and 8. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0/1.1 devices.

9.USB 3.0 ports 3, 4, 5 and 6. These 9-pin Universal Serial Bus (USB) ports connect to USB 3.0/2.0 devices.

• DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows® operating system.

Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows® OS environment and after the USB 3.0 driver installation.

USB 3.0 devices can only be used as data storage only.

We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices.

10.DVI-D port. This port is for any DVI-D compatible device. DVI-D can’t be converted to output RGB Signal to CRT and isn’t compatible with DVI-I.

Multi-VGA output supports up to three displays under Windows® OS environment, two displays under BIOS, and one display under DOS.

Intel® display architecture design supports the following maximum supported pixel clocks (Pixel Clock = H total x V Total x Frame Rate (Screen refresh rate)):

-DVI port: 165 MHz

-VGA port: 180 MHz

-HDMI port: 300 MHz

11.PS/2 Keyboard port (purple). This port is for a PS/2 keyboard.

1-14

Chapter 1: Product introduction