4.USB 2.0 connectors (10-1 pin USB910; USB1112; USB1314)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to

480 Mbps connection speed.

 

USB910

 

USB1112

 

USB1314

 

USB+5V USB P9- USB P9+

GND NC

 

USB+5V USB P11- USB P11+

GND NC

 

USB+5V USB P13- USB P13+

GND NC

Z97M-PLUS

 

 

 

 

 

 

 

 

PIN 1

USB+5V USB P10- USB P10+

GND

PIN 1

USB+5V USB P12- USB P12+

GND

PIN 1

USB+5V USB P14- USB P14+

GND

 

 

 

Z97M-PLUS USB2.0 connectors

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

The USB 2.0 module is purchased separately.

5.Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis.

Z97M-PLUS

+5V

SPDIFOUT GND

SPDIF_OUT

Z97M-PLUS Digital audio connector

The S/PDIF module is purchased separately.

Chapter 1

ASUS Z97M-PLUS

1-17