Asus Z9PE-D8 WS manual 129

2.The ARRAY SELECTION MENU displays the available drives connected to the SATA ports. Use the up/down arrow keys to select the drives you want to include in the RAID set, and then press <Space>. When selected, the drive indicator changes from READY to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number.

		LSI Software RAID Configuration						Utility Ver C.05 Sep 17, 2010
				BIOS Version				A.10.09231523R
				Easy Configuration - ARRAY SELECTION MENU
		Management	Menu				PORT #
	Configure					0	ONLIN	A00-00
	Initialize
	Objects					1	ONLIN	A00-01
	Rebuild
	Check Consistency					2	READY
						3	READY
Port # 2 DISK			74.74GB		HDS728080PLA380				05.01C05

SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Virtual Drives,F4-HSP

•The information of the selected hard disk drive displays at the bottom of the screen.

•You need at least two identical hard disk drives when creating a RAID 1 set.

•You need at least four identical hard disk drives when creating a RAID 10 set.

3.Select all the drives required for the RAID set, and then press <F10> to configure array setting.

4.Press <Space> to select the configurable array.

LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010

BIOS Version A.10.09231523R

			Easy Configuration - ARRAY SELECTION MENU
						Select Configurable		Array(s)
	Management	Menu					PORT #
Configure				A-0	0		DNLIN A00-00
Initialize			SPAN-1
Objects					1
Rebuild							DNLIN A00-01
Check Consistency

Cursor Keys, SPACE-(De)Select F2-ChIdInfo F3-SlotInfo F10-Configure Esc-Quit

ASUS Z9PE-D8 WS 5-7