5.You have multiple devices which could serve as source for a driver disk. Choose one you like to use and select OK, then press <Enter>.

Driver Disk Source

You have multiple devices which could serve as source for a driver disk.

Which would you like to use?

 

 

 

 

sdc

 

 

 

 

sdd

 

 

 

 

 

 

 

 

 

 

sdb

 

 

 

 

sr0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

 

 

 

Cancel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.Insert the Red Hat® Enterprise RAID driver disk to the USB floppy disk drive, select OK, then press <Enter>.

Insert Driver Disk

Insert your driver disk into /dev/sdb and press “OK” to continue.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

 

Back

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The drivers for the RAID card are installed to the system.

7.When asked if you will load additional RAID controller drivers, select No, then press <Enter>.

More Driver Disks?

Do you wish to load any more driver disks?

YesNo

8.Follow the onscreen instructions to finish the OS installation.

6-10

Chapter 6: Driver installation