AT&T 1177 user manual Changing feature options, Feature options

91-005677-041-000.ATT1477.qxd 2/13/1950 7:21 PM Page 32

1@MENU

Press until desired feature is heard(see list at right)

2@CHANGE

Press until desired selection is heard

3@MENU

Press to set selection and move to next menu option

Or

@PLAY/STOP

Press to store selection and exit menu

Answering System Operation

Changing feature options

Menu features can be changed to customize how the answering system operates. Press @MENU repeatedly to hear each feature. Press @CHANGE when you hear the feature you want to modify.

Feature options	(Default settings underlined)
System announces:	Feature description:
“Change Announcement”	Record your outgoing announcement
Options: [record announcement]	(see page 30).
“Change remote access code”	Enter a 2-digit number (10-99) for remote
Options: [enter 2-digit code] 19	access from another phone (see page 36).
“Change message alert”	When on, the telephone beeps every 10
Options: On / Off	seconds when you have new messages.
“Change announce only”	When on, callers hear an announcement
Options: On / Off	but cannot leave messages (see page 31).
“Change call screening”	When on, you can hear callers leave
Options: On / Off	messages, or press PHONE on the
	handset or @SPEAKERPHONE on the
	base to answer the call
“Change number of rings”	Choose number of rings before the system
Options: 2 / 4 / 6 /Toll Saver	answers a call. When Toll Saver is active,
	the system answers after 2 rings if you
	have new messages, and after 4 rings if
	you have no new messages.

NOTE: Press @CHANGE to advance the remote access code number by one digit at a time. Press and hold to advance by 10 digits at a time.

NOTE: If you turn your answering system off or if you experience a loss of power, the message alert feature will be turned off. To turn the mes- sage alert feature back on follow the above instructions.

32