17
Directory Dialing
16
Directory Dialing
Entering names into directory
To enter a name
Press dial pad buttons once for the first letter, twice for
the second, three times for the third, as shown in the
example below. To enter a number, continue pressing
the button until the number appears.
The cursor moves to the right when you press another
dial pad button or the ^button. Press ^twice to
enter a space. When the name is complete, press SELECT.
Options while entering names:
• Press Vto erase letters if you make a mistake.
• Press #repeatedly to enter an ampersand (&),
apostrophe ('), comma (,) hyphen (-), period (.), or
pound sign (#).
To enter a number
Use the dial pad to enter up to 24 digits. When the
number is complete, press SELECT.
Options while entering numbers:
• Press Vto erase numbers if you make a mistake.
• Press REDIAL/PAUSE to enter a 4-second dialing
pause.
To assign a distinctive ring
Press ^to select Y (yes) or N (no). If you choose Yes
(and if you have Caller ID service), a different ringing
style will alert you when this person calls.
Press SELECT to choose the option displayed (Y or N)
and store this entry in the directory.
Press onceto enter “A”
Press twiceto enter “B”
Press 3 timesto enter “C”
Press 4 timesto enter “2”
2
Speed dialing
Numbers called most frequently can be stored in memory
locations 1-9 and dialed with only two button presses.
You can enter 9 Speed Dial numbers up to 24 digits
long. Each number is stored in a one-digit memory
location (1-9).
To enter a Speed Dial number
1 Press PROG to begin programming.
2 Press ^ to display
SPEED DIAL
.
3 Press SELECT.
4 Press dial pad to choose memory location (1-9).
5 Enter a name (up to 15 characters), then press
SELECT.
6 Enter a telephone number (up to 24 digits), then
press SELECT.
7 Choose distinctive ringing (yes or no).
8 Press PROGto store the number. You will hear a
confirmation tone.
To call a Speed Dial number
To use speed dialing, press and hold a dial pad button
(1-9) to display the number and name stored in that
speed-dial location, then press PHONE to dial the
number.
To change or delete a Speed Dial number
Press and hold a dial pad button (1-9) to display the
entry you want. Press SELECT, then press ^until
the option you want is displayed (see page 19).
1PROG
DIRECTORY
2^
SPEED DIAL
3SELECT
ENTER 1-9
ENTER NAME
01
(See Steps 3-7 on next
page.)
1PROG

3

4SELECT
DIRECTORY
2SELECT
ENTER NAME
PAT JOHNSON_

5

PAT JOHNSON
5550100
ENTER NUMBER
6SELECT
DISTINCT RING? N
5550100
7SELECT
NEW 00 OLD 07
1/01 12:00AM
NOTE:
To view another Speed Dial number, Press "OFF".
Follow the instruction "To call a Speed Dial Number"
to display another Speed Dial number.