FEATURE SETUP
Set the time and date displayed on handset screen
If you subscribe to Caller ID service, the date and time will be set automatically with the first incoming call.
If you do not have Caller ID service, you can set the date and time manually.
•Press 
, then press 
until 
is
displayed. Press 
.
•The month is flashing. Use 
or 
to select the
current month. Press 
.
•The day is flashing. Use 
or 
to select the
correct day. Press 
.
•The hour is flashing. Use 
or 
to select the
current hour. Press 
.
•The minute is flashing. Use 
or 
to select the
correct minute. Press 
.
•
or 
is flashing. Use 
or 
to choose
between 
and 
. Press 
.
Set the phone for tone or pulse dialing (base only)
•Press 
on base.
•Press 
or 
until 
and the current
setting is displayed,then press 
.
•Use 
or 
to select the correct setting.
•Press 
to save the setting.
Set the language
•Press 
on the base or 
on the handset.
•Press 
or 
until 
is displayed.
•Press 
, the current setting is flashing.
•Use 
or 
to select 
, 
or 
.
•Press 
to save the setting.
© 2003 Advanced AmericanTelephones.
All Rights Reserved.
AT&T and the Globe Design are
trademarks of AT&T Corp., licensed to
Advanced American Telephones.
Printed in China. Issue 1AT&T 05/03
Answering System
Press 
to turn the system on or off. When the system is on, you will hear “Machine on” and the ON/OFF light will be lit.
If you turn the system on at the first time, it works using the default setting and
Set the Clock
1Make sure the answering system is on.
2Press 
.The system announces the clock setting then announces:“To change clock, press 
.”
3Press 
.
4Press 
until the system announces the
correct day, then press 
.
5Press 
until the system announces the
correct hour, then press 
.
6Press 
until the system announces the
correct minutes,then press 
.
7Press 
until the system announces the
correct years,then press 
. The system announces the current clock setting.
¥NOTE:You can choose to set the day and time manually, or you can allow it to be set automatically with incoming Caller ID Information.
¥NOTE: Press and hold 
to advance the minute or the year by 10.
¥NOTE: The selection of the year is from 2000 to 2039.
Record Your Announcement
¥NOTE: For complete details about recording announcements, see “Record Your Announcement” in the ANSWERING SYSTEM OPERATION section of your User’s Manual.
1With the system set for the desired answer mode
(normal or Announce Only) press 
until you hear “Change announcement.”
2Press 
. After you hear “Now recording” followed by a beep, speak toward the
base to record an nnouncement up to 90 seconds long.
3Press any MAILBOX/STOP button to stop recording. The system plays back your recorded message.
