AT&T 8101, 8110 manual Conference

Note: You can privately discuss the call with the third party at this time; if no answer or busy, press [ FLASH ] twice to return to original party.

● Call 1 is reconnected

Note: Do not hang up or call will be dropped.

To return to held call

1 Press [ FLASH ] twice

To put call 1 on hold and place call 2 1 Press [ FLASH ] [recall dial tone]

● Call 1 is put on hold

2 Dial call 2 (or another feature)

To complete call 2 and return to call 1 1 Press [ FLASH ] [recall dial tone]

2 Press [ FLASH ] twice

To answer a call waiting tone, putting your present call on hold

1Press [ FLASH ] [recall dial tone]

2Dial Hold code

●You are connected to waiting call

To return to held call

1Complete present call and hang up

●Held call sends 3-burst priority ring

2Lift handset

●You are connected to held call

CONFERENCE [ ✔ ]

To add a third party to a call

1Press [ FLASH ] [recall dial tone]

●Present call is put on hold

2Dial number of third party

do not need to answer or place another call), press

[ HOLD ] on your telephone. When you want to return to the held call, press [ HOLD ] again. See “Hold” in the section titled Phone Features.

Version Note: If you are using System 75, Version 1, use the following directions:

To put a call on hold

1 Press [ FLASH ] [recall dial tone]

3		Press [ FLASH ]
		● All parties are now connected
To drop a third party
1		Press [ FLASH ]
		● You remain connected to original party
	DROP (for 8102 and 8110 Users)		[ ]

To disconnect from a normal call, or to drop the last party added to a conference call

1Press the button you have programmed as [ DROP ]

HOLD (with Second Dial Tone) [ ✔ ]

Note: The following feature allows you to place or answer another call or activate another feature while you have a call on hold. If you want merely to put a call on hold while you are busy with another task (and

5

To complete call 2 and return to call 1

1After party on call 2 hangs up, press [ FLASH ] twice

●Call 1 is reconnected

Version Note: If you are using System 75, Version 2, Version 3, or DEFINITY Generic 1, use the following

directions:

To put a call on hold

1Press [ FLASH ] [recall dial tone]

2 Dial Hold code [dial tone]

Note: If you hang up, held call sends a 3-burst priority ring.

To return to held call

Hang up, receive 3-burst priority ring, and lift handset

To put call 1 on hold and place call 2

1Press [ FLASH ] [recall dial tone]

2 Dial Hold code [dial tone]

●Call 1 is put on hold

6