AT&T 905 user manual Storing Numbers, Dialing Numbers, Use Two Memory Locations

Memory Features

Capacity: The Big Button Plus 905 telephone can store 12 different telephone numbers, each up to 24 digits long.

One-Touch Dialing: Three numbers can be stored in one-touch memory locations. You can dial these numbers by pressing one of the buttons marked with an emergency symbol.

Speed Dialing: Nine telephone numbers can be stored in standard speed-dialing locations. You can dial any of these numbers by pressing two buttons.

NOTE: You may choose to store emergency numbers in memory locations. This feature is provided only as a convenience and the manufacturer assumes no responsibility for customer reliance upon the memory feature. Programming/testing of emergency numbers should be performed in the early morning or late evening (off peak) hours.

Directory Card: Remove the directory card. Write your telephone number in the space provided. Also write the telephone numbers (or names) that you want to store in each memory location. Reinstall the card and clear plastic cover.

NOTE: Numbers programmed into a memory location might not be retained if the telephone has been unplugged from the line jack for a half hour or more.

One-Touch Dialing

Storing Numbers

1Lift the handset, and listen for a dial tone.

2Press and release PROGRAM .

3Dial the telephone number you want to store. You will hear a beep each time you press a button.

4Press and release the memory

button (, or ) where you are storing the number. You will

MEMORY

hear two beeps to confirm that the number has been stored correctly.

5Hang up after the number is stored correctly.

Repeat Steps 1-5 to store another number in memory.

NOTE: Each time you complete stor- ing a telephone number by pressing a memory location, listen for two quick beeps to confirm that the num- ber has been stored in memory. If you hear several beeps, the number has not been stored: hang up and start over. An extension phone “of f the hook” can interrupt program - ming. If you still have trouble, see “In Case of Dif ficulty.”

Dialing Numbers

1Lift the handset and listen for a dial tone.

2Press and release a memory button

(, or ).

Speed Dialing

Storing Numbers

1Lift the handset.

2Press PROGRAM .

3Dial the telephone number you want to store. You will hear a beep each time you press a button.

4Press MEMORY .

5Press a digit (1-9) for the memory button where the number is to be stored.

6Hang up after the number is stored correctly.

Repeat Steps 1-6 to store another number in memory.

Dialing Numbers

1Lift the handset and listen for a dial tone.

2Press MEMORY .

3Press a memory location (1-9).

Storing Numbers Just Dialed

Whenever you make a telephone call, you can store the number you dialed without re-entering the digits by hanging up and following the

directions for storing a number in “One-T ouch Dialing” and “Speed Dialing,” and pressing REDIAL instead of dialing the telephone number.

Dialing Long Numbers

There are two ways to dial telephone numbers that are too long to fit into a memory location.

Use Two Memory Locations

You can store a number of more than 24 digits by dividing it and storing it in two memory locations.

Follow the directions for storing numbers in “One-T ouch Dialing” and “Speed Dialing” to store the number in two memory locations.

To dial, lift the handset, listen for a dial tone, then:

•Press the memory button for the first location (or press MEMORY and a memory location 1-9) and wait for the dialing to stop.

•Press and release the memory button (or press MEMORY and a memory location 1-9) for the second location.

Combine Manual and Memory Dialing

Instead of using two memory loca- tions, you might choose to store only part of a long number. You can use memory dialing to dial the stored por- tion, then dial the other digits manu- ally. If the stored portion is dialed first, wait for dialing to stop before you continue with manual dialing.

Erasing Numbers

To remove any number from memory, enter another number in the same location. To clear a memory location and leave it empty:

1Lift the handset.

2Press and release PROGRAM .

3Press the memory button (or MEMORY and a memory location button 1-9) of the memory location you want to clear.

4