INSTALLATION
5
Table/Desk Installation
1Connect the telephone line cord(s).
If you have a two-line
jack, use only the line
cord with the black
plugs. Plug one end into
the jack labeled L1/L2
on the base,then plug
the other end into the
wall jack. Make sure the
cord snaps firmly into
place.
If you have two
separate jacks, use
both line cords. Plug
one end of the line cord
with black plugs into the
jack labeled L1/L2 on the
back of the base,then
plug the other end into
the wall jack for Line 1.
Plug one end of the
other line cord into the
jack labeled L2 on the
back of the base,then
plug the other end into
the wall jack for Line 2.
Make sure the cords
snap firmly into place.
2Connect the power cord.
Use only the power cord supplied with this product. If you
need a replacement,call 1 800 222-3111.