Use the softkey to select HOME (the
screen displays Enter Area Code
and ---),then use the keypad to enter
your home area code. If you make a
mistake,select ERASE and re-enter the
correct digits. Use the softkey to
select DONE.
13 Program Local Area Codes(s).
You can program up to four Local Area Codes
If for You dial Then enter
All calls outside 11 digits No Local Area Codes
your home area code (1+ area code
+ phone number)
Some calls outside 10 digits Area codes that do
your home area code (area code not require a “1”
+ phone number)
If you dial 10 digits (area code plus phone number) for calls within your
own area code,include your area code as a Local Area Code.
Use the softkeys to select the area code you want to program
(LOCAL1–LOCAL4),then use the keypad to enter each code as for
the Home Area Code in Step 12.Use the softkey to select DONE.
14 Set Dial Mode.
This product comes set for touch tone dialing. If you have dial
pulse (rotary) dialing service,you cannot dial numbers with the
phone set to touch tone. The current selection for Line 1 is
flashing. Use +or -to select TOUCH TONE or DIAL PULSE,then
use the softkey to select OK. The current selection for Line 2 will
then flash. Repeat this process to set the dial mode for Line 2.
15 Select Primary Line.
If Automatic Line Selection is off,the primary line (preset to Line 1)
is the line that will be selected when you lift the handset or press
Sif you do not manually choose a line. If Automatic Line
Selection is on,the primary line is the line that will be selected if
both lines are idle,both are ringing, or both are busy. To select
Line 2,use the softkey to select LINE 2, then select OK.
16 Set Automatic Line Selection.
You can choose whether the system will automatically select an
idle or ringing line when you make or answer a call. Use the
softkey to select ON to turn this feature on,or select OFF to turn
the feature off. Then select OK.
10
INSTALLATION
LOCAL1 LOCAL2
Change which
area code?
HOME DONE