16
TELEPHONE OPERATION
TELEPHONE OPERATION
Conference Calls
You can use both lines at the same time to set up a
three-way conference call.
1Make or answer a call and press H.
2Establish a call on the other line.
3Press H,then press C. If you want
to change to another mode,you can press
Kor hor lift the handset once
all parties are connected.
To end a conference call,hang up
If one caller hangs up during a conference call,you might
hear a dial tone. Press the LINE button of the remaining
call to disconnect the other line and eliminate the dial tone.
NOTE: Under certain circumstances,the far-end
parties on a conference call may not hear one another
clearly.
Place a conference call on Hold
1Press Hto hold both lines.
2Press Cto release Hold,then lift
the handset or press Kor h
and continue your conference call.
Talk privately with one caller during a
conference call
1Press H. Both lines are put on Hold.
2Press the LINE button of the person with
whom you want to speak privately then lift
the handset or press Kor h.
3Press Cto release Hold and continue
your conference call.
Drop one party from a conference call
To disconnect one party from a conference call and keep
the other on the line,press the LINE button of the call
you want to continue.
NOTE:If you leave the Cbutton down after
a conference call,then dial another number, your call
might be completed,but you might hear a busy signal
from the other line. Press H, then press each LINE
button until you identify the line being used for your
completed call.
M
MM
MMM
MM
MM
M
MM
MM
M
MM
MMM
MM
MMM
MM
MMM
MM
MM
❖
❖❖
❖❖
982_CIB_3ATT 2/4/05 9:52 AM Page 16