AT&T 993 user manual Dial a one-touch number

One-touch operation (speed dial)

One-touch (speed dial)

Dial a one-touch number

If the auto speaker is turned on, numbers will be dialed using the method selected in the Set preferred mode on page 21. If the preferred mode is Headset but no headset is connected, the number will be dialed using the speakerphone.

Press and release a one-touch key.

— OR —

Press and release LOWER, then press the desired one-touch key. The number is dialed automatically and displayed on the screen.

If Auto Speaker is turned off, or if you want to use the handset or headset regardless of the auto speaker programming:

. Lift the handset.

— OR —

Press SPEAKER.

— OR —

Press HEADSET and listen for a dial tone.

2.Press and release a one-touch key.

— OR —

Press and release LOWER, then press the desired one-touch key.

The number is dialed automatically and is displayed on the screen.

— OR —

While you are viewing the one-touch entry:

. Press or until the screen display includes DIAL. 2. Press Enter.

NOTES:

. For more information about the auto speaker setting, see Turn auto speaker on or off on page 19.

2.If there is a 30-second wait in the dialing sequence, press any dial pad key or one-touch key to end the wait and continue the dialing sequence.

41