O P E R A T I N G R A N G E
This cordless telephone operates at the maximum power allowed by the Federal Communications Commission (FCC). Even so, the handset and base can com- municate over only a certain distance — which can vary with the locations of the base and handset, the weather, and the construction of your home or office.
When you make a call, if the handset is at to a point where the base and handset can not communicate, the handset will sound two short beeps, indicating that you are out of range. Move closer to the base to re- store normal operation.
If you receive a call while you are out of
range, the handset might not ring — or if it does ring, the call might not connect when you press P. Move closer to the base, then press Pto answer the call.
If you move out of range during a phone conversation, you will hear noise or inter- ference. To improve reception, move closer to the base.
If you move out of range while on a call, the phone will be left “off the hook.” To hang up properly, walk back into range, periodically pressing P until the PHONE light goes off.
Changing Channels
This cordless telephone has an advanced
In the unlikely event that you notice noise or interference while using the handset:
1Press C.
2If the interference does not clear, continue to press Cuntil you find a clear channel (your call will not be interrupted
—OR—
Move closer to the base and press C.
NOTE: You must be in range to change channels.
8
