Battery installation & charging
Install batteries as shown, then place the handset in the charger for at least 8 hours before use. You can keep batteries charged by returning the handset to the charger after each use. When battery power is fully depleted, a full recharge takes about 6 hours.
Press coin into slot on base of handset to release latch, then remove battery cover
To replace battery cover
Insert top tab first
LOW BATTERY
REDIAL MENU MEM
Low battery indicator
Return handset to charger to recharge when this symbol flashes. (Handset will beep when battery is low.)
Insert supplied batteries
Caution: Use only AT&T 2AA NiCad or NiMH rechargeable batteries. Do not use AA alkaline batteries.
Plug power cord into jack on underside of charger, then plug transformer into electrical outlet
Press down to click in place
Place handset in charger to charge for 8 hours before first use.
Light remains on while batteries are charging.
2
