AT&T E2801 user manual With the telephone base. Allow up to one minute for this

Appendix

Troubleshooting

The system does	•	Make sure you subscribe to Caller ID with Call Waiting fea-
not receive caller		tures services provided by the local telephone company.
ID or the system	•	The caller may not be calling from an area which supports
does not display
caller ID during		caller ID.
call waiting.	•	Both you and the caller’s telephone companies must use
		equipment which are compatible with caller ID service.
	•	If you subscribe to DSL service, install a noise filter to the
		telephone line between the telephone base and the tel-
		ephone line jack. Contact your DSL service provider for filter
		information.
Common cure	•	If the telephone is not responding normally, trying putting
for electronic		the cordless handset in the telephone base. If it does not
equipment.		seem to respond, try the following (in the order listed):
		1. Disconnect the power to the telephone base.
		2. Disconnect the battery on the cordless handset.
		3. Wait a few minutes before connecting power to the
		telephone base.
		4. Re-install the battery and place the cordless handset
		into the telephone base.
		5. Wait for the cordless handset to synchronize its connection
		with the telephone base. Allow up to one minute for this
		to take place.

38