![](/images/new-backgrounds/1236759/23675977x1.webp)
1. | SETUP |
| until desired feature |
| is heard (see list at |
| right). |
Answering system operation
Changing feature options
You can change how the answering system oper- ates. Press SETUP repeatedly to hear each feature. When you hear the feature you want to modify press SKIP or
REPEAT to change the setting. Press SETUP to set selection and move to next menu
option, or press PLAY/STOP to exit.
Feature options (default settings underlined).
2. | SKIP or |
REPEAT until desired selection is heard.
3. | SETUP |
| to set selection and |
| move to next menu |
| option. |
System announces:
"Number of rings," current setting, then "To change the setting press SKIP or REPEAT; to continue setup, press SETUP." Options: 2/4/6/toll saver
Feature description:
Choose number of rings before the sys- tem answers a call. When toll saver is active, the system answers after two rings if you have new messages, and after four rings if you have no new messages. When retrieving messages from a long distance call, you may disconnect your call after three rings so that there will be no long distance charge incurred.
- OR - |
PLAY/STOP
“Base ringer,” cur- rent setting, then “To change the setting press SKIP or REPEAT; to continue setup, press SETUP.” Options: high/low/off
Choose telephone base ringer vol- ume to high or low level, or turn the telephone base ringer off.
to set selection and exit menu.
NOTES:
1. The message alert tone will beep only if all the condi- tions below are met:
Answering system is on Message alert tone set- ting is on
"Remote access code," current setting, then "To change the setting press SKIP or REPEAT; to continue setup, press SETUP." Options: (select two- digit code) 19
Select a
NOTE: Press and hold
SKIP or
REPEAT to increase or decrease the remote access code number by 10.
Have new messages
2.Press any base key (except
RECORD, ANSWER ON and
HANDSET LOCATOR) to temporarily silence the message alert tone. If you press and hold
DELETE you will delete all old mes- sages and the message alert tone will be temporarily silenced. The message alert tone will be
"Message alert tone," current setting, then "To change the setting press SKIP or REPEAT; to continue setup, press SETUP." Options: on/off
When on, the telephone beeps every 10 seconds when there are new mes- sages.
36