37
Answering system operation
37
Message counter displays

The message counter usually displays the total number of

memos and incoming messages. See the list below for

explanations of other displays in this counter.

Message counter displays

0 No messages.
1-98 Number of messages/memos, or message number
currently playing (flashes if you have new mes-
sages).
10-99 Current remote access code while setting
(see page 34).
1-8 Current volume level while adjusting.
1-99 (counting) Elapsed time while recording a memo (see page 36)
or announcement up to 90 seconds (page 32).
99 (flashing) Memo recording exceeded 99 seconds.
F (flashing) Memory is full. Messages must be deleted before
new messages can be received.
CL (flashing) Clock needs to be set (see page 31).
A Announcement only mode is on (see page 33).
-- System is answering a call, or being accessed
remotely.
-- (flashing) System is being programmed or initialized.
On (or) OF Displayed for one second when any answering
system setting is turned on or off.
02, 04, 06, tS Current number of rings while setting (see page
34).
Message counter