AT&T ME1126 Message playback, Announcements, Options during playback, To delete all messages

Models: ME1126

1 59
Download 59 pages 26.38 Kb
Page 36
Image 36

Number of messages (or, during playback, message number cur- rently playing).

14

Press PLAY/STOP to begin or end message playback.

(PLAY/STOP)

“You have [xx] new messages and [xx] old messages”

Message playback begins. See options at right.

(PLAY/STOP)

Message playback ends.

NOTE: If “F” is flashing in the message window, mem-

ory is full. You will have to delete some messages before new ones can be recored.

NOTE: New (unheard) messag- es cannot be deleted.

Answering System Operation

Message playback

Press PLAY/STOP to hear messages.The system announces the number of messages, then begins play- back.

If you have new messages, you will hear only the new messages (oldest first). If there are no new messages, the system will play back all messages (oldest first).

Announcements

When playback begins, you will hear the total number of messages.

Before each message, you will hear the day and time it was received.

After the last message, you will hear “End of mes- sages”. If the system has less than 5 minutes of recording time left, you will hear time remaining.

Options during playback

Press VOLUME button to adjust speaker volume.

Press SKIP to skip to next message (or hold down to speed up message playback).

Press REPEAT to repeat message currently playing. Press twice to hear previous message (or hold down to slow message playback).

Press DELETE to delete message being played back.

Press PLAY/STOP to stop playback.

To delete all messages

To delete all messages, press and hold DELETE while the phone is idle (not during a call, or during message playback).

32

Page 36
Image 36
AT&T ME1126 user manual Announcements, Options during playback, To delete all messages, Message playback ends